Ford Transit Cutaway 350 HD in Redlands

The 138-inch wheelbase gives the 2027 Transit Cutaway 350 HD XL a unique advantage in urban environments and confined job sites. Businesses that frequently navigate crowded streets, loading docks, parking structures, and tight service areas benefit from the vehicle's responsive handling and maneuverability.

The 2027 Ford Transit Cutaway 350 HD XL incorporates modern safety and driver-assist technologies designed to support confidence on the road. Available safety systems help drivers maintain awareness of surrounding traffic and potential hazards while navigating busy streets, highways, and job sites.

Built to handle substantial payload demands, the 2027 Ford Transit Cutaway 350 HD features an impressive 11,000-pound GVWR. This heavy-duty rating allows businesses to maximize cargo capacity while supporting a wide variety of upfit solutions. Whether transporting equipment, tools, supplies, or specialized machinery, the Transit Cutaway 350 HD is engineered to deliver dependable performance under heavy loads.

The dual rear wheel configuration significantly enhances the 2027 Ford Transit Cutaway 350 HD's stability and load-carrying capabilities. By distributing weight across four rear tires, the vehicle can better manage heavier payloads and specialized upfits while maintaining confident handling characteristics. For businesses that require consistent performance under demanding conditions, the DRW setup provides additional support and improved road stability.

At the heart of the Transit Cutaway 350 HD is a 3.5L V6 engine paired with a 10-speed automatic transmission, delivering a balance of power and efficiency suited for commercial duty cycles. Output typically reaches up to 300 horsepower depending on configuration, providing strong acceleration even when fully loaded or upfitted. Rear-wheel drive enhances predictable handling under heavy cargo conditions, while the 10-speed transmission is tuned to maintain torque delivery across a wide range of speeds, improving drivability in both urban and highway applications.

Inside the cab, the Transit Cutaway 350 HD XL trim focuses on durability and functionality rather than luxury, making it ideal for commercial use. The seating layout supports two occupants, with ergonomic controls designed for long-duty cycles and frequent stop-and-go driving. Ford's commercial cab design emphasizes visibility, ease of entry and exit, and straightforward instrumentation, all of which are critical for fleet drivers who spend extended hours on the road.

Built to handle demanding workloads, the 2027 Ford Transit Cutaway 350 HD XL features a reinforced frame and heavy-duty suspension components designed to support a variety of body configurations. The 9,950-pound Gross Vehicle Weight Rating offers substantial payload capacity, making it an excellent choice for businesses that regularly transport equipment, tools, inventory, or passengers.

The available AWD system adds another layer of capability to the 2027 Ford Transit Cutaway 350 HD XL, helping support confident handling in changing weather and road conditions. For businesses that operate across rain, snow, uneven pavement, or mixed urban and suburban routes, AWD can be a valuable advantage. It helps make this Transit Cutaway a strong option for service providers, contractors, delivery operations, passenger transport, and fleet managers who need reliable performance throughout the year.

The 2027 Ford Transit Cutaway 350 HD XL trim level focuses on practicality and essential functionality, prioritizing durability and ease of maintenance over luxury features. This makes it a strong choice for fleet operators who need dependable vehicles that can withstand high mileage and demanding daily use. Interior configuration is designed for work efficiency, with durable materials and straightforward controls that support driver productivity.

The 2027 Ford Transit Cutaway 350 HD XL is widely used across multiple industries due to its flexibility and strength. It is commonly upfitted into delivery box trucks for last-mile logistics, contractor service vehicles with organized storage compartments, shuttle buses for transportation services, and specialty vocational units for mobile businesses. Its modular design allows fleet managers to standardize chassis while customizing bodies for specific operational needs, reducing long-term ownership complexity.

The 2027 Ford Transit Cutaway 350 HD XL AWD is engineered for commercial operators who need maximum structural strength, predictable handling, and flexible upfit capability. Built on Ford's heavy-duty Transit platform, this configuration blends a dual rear wheel chassis, extended wheelbase, and all-wheel-drive traction system to support demanding vocational applications such as shuttle bodies, box trucks, utility builds, and specialty fleet conversions.

The 156-inch wheelbase offers a balance between maneuverability and cargo capacity, making it a popular choice for mid-to-large vocational builds. This length supports a wide range of aftermarket and OEM upfits while maintaining manageable turning dynamics in urban environments. Whether configured as a shuttle bus, mobile workshop, delivery box, or service body, the extended wheelbase contributes to improved ride stability, particularly when the vehicle is fully loaded or operating in stop-and-go fleet conditions.

The 2027 Ford Transit Cutaway 350 HD is equipped with Ford's 3.5L PFDi V6 engine paired with a 10-speed automatic transmission. In this setup, output is engineered for consistent low-end torque delivery and sustained performance under load, making it suitable for stop-and-go commercial duty cycles and long highway routes alike.

The 9,950 GVWR rating places the 2027 Ford Transit Cutaway 350 HD XL in a highly strategic category for commercial users seeking strong payload capability while maintaining operational flexibility. This rating supports substantial upfit configurations without exceeding key regulatory thresholds in certain fleet applications.

At the core of the 2027 Ford Transit Cutaway 350 HD XL is a reinforced chassis engineered for commercial durability. The 9,950-pound GVWR rating places it in a sweet spot for operators who need substantial payload capacity without stepping into higher regulatory thresholds in many use cases. The DRW configuration improves rear-end stability, especially when the vehicle is fully upfitted and loaded, helping distribute weight more effectively across the rear axle.

The cutaway chassis design eliminates the rear cargo body, allowing upfitters to install custom-built solutions tailored to business needs. This flexibility is one of the strongest advantages of the 2027 Ford Transit Cutaway 350 HD lineup. The 156-inch wheelbase supports a wide range of body lengths and configurations, from compact utility boxes to extended shuttle bodies.

The 2027 Ford Transit Cutaway 350 HD XL featuring a 178-inch wheelbase is one of the longest available in the Transit Cutaway lineup, making it ideal for extended body applications. This length supports a wide range of vocational builds, including shuttle buses with multiple passenger rows, step vans, refrigerated bodies, and service utility enclosures. The extended frame improves stability when carrying uneven loads or tall upfits that raise the vehicle's center of gravity.

The 2027 Ford Transit Cutaway 350 HD is known for its upfit versatility. The chassis is designed to accept a wide variety of aftermarket and OEM-approved body installations, enabling businesses to customize the vehicle for specific operational needs. Common applications include box trucks for last-mile delivery, shuttle buses for passenger transport, refrigerated cargo builds, utility service bodies for trades, and specialty vocational builds for municipal fleets.

The 11,000 GVWR rating places the 2027 Ford Transit Cutaway 350 HD XL in a strong position for commercial fleet work, balancing payload capability with maneuverability. This rating supports heavier upfits and equipment packages while still maintaining compliance for a wide range of vocational applications.

The combination of an 11,000 GVWR rating, extended 178-inch wheelbase, dual rear wheels, and AWD capability makes the 2027 Ford Transit Cutaway 350 HD XL one of the most versatile commercial platforms in its class. It is designed for operators who need dependable performance under load, adaptable upfit potential, and year-round usability.

With a Gross Vehicle Weight Rating of 9,950 pounds, the 2027 Ford Transit Cutaway 350 HD XL offers substantial carrying capacity while remaining practical for numerous commercial applications. The robust chassis is designed to support a variety of upfit solutions without compromising performance or reliability. Businesses involved in logistics, construction, maintenance services, transportation, and mobile operations can benefit from the vehicle's ability to accommodate demanding workloads while maintaining operational efficiency.

The 2027 Ford Transit Cutaway 350 HD incorporates technology designed to support productivity, connectivity, and fleet management. Modern infotainment systems, available connectivity solutions, and driver-assistance technologies help improve operational efficiency while enhancing the overall ownership experience. Fleet managers can benefit from technologies that support vehicle monitoring, maintenance scheduling, and driver communication, helping businesses maximize uptime and improve operational performance.

The 2027 Ford Transit Cutaway 350 HD XL AWD is designed for businesses that require a durable, adaptable, and capable commercial vehicle platform. Combining Ford's Heavy-Duty Transit architecture with intelligent All-Wheel Drive capability, this cutaway model provides an outstanding foundation for a wide variety of vocational upfits.

Equipped with a dual rear wheel configuration, the 2027 Ford Transit Cutaway 350 HD is engineered to handle demanding workloads. The dual rear wheels provide enhanced load distribution, increased stability, and improved confidence when transporting heavy equipment, tools, cargo, or specialized upfit bodies.